Grinding Belts

Eisenblätter sanding belts are the right choice for a wide range of applications such as satin finishing, pre-sanding or polishing to a mirror finish. Available in different belt dimensions and grits or with the practical T-Lock fastener for processing pipes on closed pipe constructions and handrails.
Eisenblätter sanding belts are the right choice for a wide range of applications such as satin finishing, pre-sanding or polishing to a mirror finish. Available in different belt dimensions and... read more »
Close window
Grinding Belts
Eisenblätter sanding belts are the right choice for a wide range of applications such as satin finishing, pre-sanding or polishing to a mirror finish. Available in different belt dimensions and grits or with the practical T-Lock fastener for processing pipes on closed pipe constructions and handrails.
Top seller
Edelkorund Schmalband für BAND-IT und BAND-IT AKKU Corundum grinding belt (Narrow)
From 0.71£ *
Spezial TZ-Pyramid Band 40 x 780 mm TZ-Pyramid Band belt 40 x 780 mm
5.46£ *
Zirkon Schleifband 30 x 533 mm für ROHR MAX AKKU Zirconium grinding belt 30 x 533 mm
1.52£ *
Spezial Zirkon Band 40 x 780 mm Zirconium belt 40 x 780 mm
2.45£ *
POLY-PTX Edelkorund Schleifband 30 x 600 mm POLY-PTX corundum grinding belt 30 x 600 mm
1.45£ *
Trizact™ Schmalband 9 x 533 mm für BAND-IT AKKU Trizact™ belt (Narrow) 9 x 533 mmm
1.56£ *
POLY-PTX Trizact Band 30 x 600 mm POLY-PTX Trizact™ belt 30 x 600 mm
3.77£ *
POLY-PTX TZ-Pyramid Band 30 x 600 mm POLY-PTX TZ-Pyramid belt 30 x 600 mm
3.01£ *
SC Vlies Band 40 x 780 mm, grob SC fleece belt 40 x 780 mm
10.46£ *
SC Vlies Band 30 x 533 mm, grob SC fleece belt 30 x 533 mm
8.54£ *
Filter
Close filters
 
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 3
No results were found for the filter!
Trizact™ Schmalband 9 x 533 mm für BAND-IT AKKU
Trizact™ belt (Narrow) 9 x 533 mmm
Saves several work steps thanks to high material removal with a very fine grinding pattern and simultaneous removal of scratches and welding points. The ideal start for a later mirror finish polishing. Leaves behind the slightest roughness. Features: Dimensions 9 x 533 mm. Abrasive cloth with pyramid-shaped grain structure and additional heat-insulating layer. Suitable for...
1.56£ *
ROHR FIX DUO Edelkorund Hülse 60 x 260 mm
ROHR FIX DUO Corundum Grinding Sleeve
Wide belt made from high quality corundum for a wide range of grinding applications. For reducing spot welds, removing with deep scratches, rust, scale and for coarse industrial grinding. Features: Dimensions 60 x 260 mm Corundum fabric for a consistent finish and a long service life Tear-proof thanks to reinforced back fabric Extra stable glue point
2.42£ *
ROHR FIX SC-Vlies Hülse 60 x 260 mm
ROHR FIX DUO SC Fleece Sleeve 60 x 260 mm, medium
Technical surface conditioning fleece sleeve for removing minor scratches and oxide layers, matt and satin finish and deburring surfaces on pipe constructions and handrails. Features: Dimensions 60 x 260 mm High-quality surface conditioning (SC) fleece material with reinforcing fabric for extremely long service life. Fine sanding in all grit sizes up to matt gloss.
5.08£ *
ROHR FIX DUO Superpolish Hülse 60 x 260 mm
ROHR FIX DUO SuperPolish Sleeve 60 x 260 mm
Revolutionary special fleece. In combination with polishing pastes and creams, achieves a brilliant mirror finish on VA and non-ferrous metals without streaks and shadows. Features: Polishing fleece material. Material thickness 5 mm. Dimensions 60 x 2603 mm. Extra stable glue point. Note: Always use an extra SuperPolish tape for each paste and cream so as not to mix...
7.26£ *
ROHR FIX DUO Trizact Hülse 60 x 260 mm
ROHR FIX DUO Trizact™ Sleeve 60 x 260 mm, grit...
Saves several work steps thanks to high material removal with a very fine grinding pattern and simultaneous removal of scratches and spot welds. The ideal start for a later mirror finish polishing. Leaves behind the slightest roughness. Features: Dimensions 60 x 260 mm. Abrasive cloth with pyramid-shaped grain structure and additional heat-insulating layer. Extra stable glue...
4.25£ *
POLY-PTX Eco Smart Schleifbandrolle
POLY-PTX® Eco Smart Grinding Belt Roller 85 x...
Drive roller for the use of sanding belts up to 30 mm wide on POLY-PTX® and other longitudinal grinding machines with 19 mm spline shaft. Ideal for processing open and closed round tube structures. Features: Wear-resistant Vulculan with side thrust washers made of stainless steel and optimized Shore hardness. Grooved surface for better grip and slip-free work. Dimensions 85...
59.36£ *
Spezial TZ-Pyramid Band 40 x 780 mm
TZ-Pyramid Band belt 40 x 780 mm
Ideal for mirror polish preparation This abrasive material, with its uniform, pyramid-shaped structure, quickly removes scratches and weld spots . It produces a very smooth surface in record time , saves working time , and reduces the grinding temperature compared to conventional abrasives. The special TZ-Pyramid material is ideal for preparing for high-gloss polishes and...
5.46£ *
POLY-PTX TZ-Pyramid Band 30 x 600 mm
POLY-PTX TZ-Pyramid belt 30 x 600 mm
Ideal for mirror polish preparation This abrasive material, with its uniform, pyramid-shaped structure, quickly removes scratches and weld spots . It produces a very smooth surface in record time , saves working time , and reduces the grinding temperature compared to conventional abrasives. The special TZ-Pyramid material is ideal for preparing for high-gloss polishes and...
3.01£ *
TZ-Pyramid Schmalband 9 x 533 mm für BAND-IT AKKU
TZ-Pyramid belt (Narrow) 9 x 533 mm
Ideal for mirror polish preparation This abrasive material, with its uniform, pyramid-shaped structure, quickly removes scratches and weld spots . It produces a very smooth surface in record time , saves working time , and reduces the grinding temperature compared to conventional abrasives. The special TZ-Pyramid material is ideal for preparing for high-gloss polishes and...
1.24£ *
TZ-Pyramid Schleifband 30 x 533 mm für ROHR MAX AKKU
TZ-Pyramid belt 30 x 533 mm
Ideal for mirror polish preparation This abrasive material, with its uniform, pyramid-shaped structure, quickly removes scratches and weld spots . It produces a very smooth surface in record time , saves working time , and reduces the grinding temperature compared to conventional abrasives. The special TZ-Pyramid material is ideal for preparing for high-gloss polishes and...
3.10£ *
Schleifbandrolle mit M14 Gewinde
Grinding belt drive roller with M14 thread
Belt drive roller made of wear-resistant, soft, grooved Vulculan plastic for better grip and slip-free work with stainless steel stop washers on the side. Features: Dimensions Ø 85 x 70 mm. M14 thread mount. Maximum speed 6,500 rpm. Wear-resistant Vulculan with side thrust washers made of stainless steel and optimized Shore hardness. With vibration-damping sleeve for 100%...
62.14£ *
Filz Schmalband 9 x 533 mm für BAND-IT und BAND-IT AKKU
Felt belt (Narrow) 9 x 533 mm
First-class merino felt belt for the main polishing up to a mirror finish of VA and non-ferrous metals, can be used on both sides. Also suitable for hard plastics. Features: Merino felt material. Dimensions 9 x 533 mm. Material thickness 5 mm. Suitable for BAND-IT, BAND-IT AKKU. Note: Always use an extra felt band for each paste and cream so as not to mix different grains....
3.94£ *
1 From 3
Viewed